Influence of Plant Species on Microbial Activity and Denitrifier Population Development in Vegetated Denitrifying Wood-Chip Bioreactors.

The microbial characteristics of four vegetated and one unplanted wood-chip bioreactors treating greenhouse effluent were investigated in a continuous experiment operated for over 2.5 years. The bioreactors were designed to reduce nitrate concentrations via naturally induced microbial denitrification. The vegetation type and reactor depth were both found to be significant factors in defining the mixed microbial activity. However, a consistent correlation between the abundance of the denitrifying communities and reactor depth could not be found across all reactors. The media samples from the unit planted with Typha angustifolia displayed higher microbial activities compared with the other reactors. This plant's root-associated bacteria also demonstrated the greatest copies of the denitrifying genes nirK and nosZ. The most abundant denitrifier communities and those encoding the nosZ gene were found in the unplanted reactor, followed by the T. angustifolia unit. The T. angustifolia reactor demonstrated greater microbial activity and denitrification capacity at the depth of 20 cm, while the greatest denitrification capacity in the unplanted reactor was found at the depth of 60 cm. These findings indicated the importance of the T. angustifolia rhizosphere to support microbial community establishment and growth in the vicinity of the plant's roots, although those populations may eventually develop in an unplanted environment.

Interstitial water microbial communities as an indicator of microbial denitrifying capacity in wood-chip bioreactors.

The discharge from food production greenhouses (greenhouse effluent) contains high nutrient and salt concentrations, which, if directly released, can have adverse effects on the environment. Wood-chip bioreactors are increasingly popular passive water treatment systems favoured for their economical denitrification in treating agricultural field tile drainage. Microbial communities are central to denitrification; however little is known about the maturation of microbial communities in wood-chip bioreactors treating greenhouse effluents. In this study, multiple subsurface flow wood-chip bioreactors, each vegetated with a different plant species, together with an unplanted unit, received synthetic greenhouse effluent with elevated nitrate concentrations. The hybrid bioreactors were operated for over 2 years, during which time water samples were collected from the inlet, outlet and within the reactors. The increasing denitrification rate in the bioreactor planted with Typha angustifolia (narrowleaf cattail) correlated with increasing microbial activity and metabolic richness, measured by the carbon utilization patterns in Biolog® EcoPlates. Increased denitrifying gene (nirS) copies (determined by quantitative polymerase chain reaction, qPCR), and near-complete nitrate removal were observed in the T. angustifolia and unplanted reactors after 16 and 23 months of operation respectively. The findings suggested that an acclimation period of at least one year can be expected in unseeded bioreactors planted with T. angustifolia, while bioreactors without vegetation may require a longer time to maximize their denitrification capacity. These results are important for the design and operation of wood-chip bioreactors, which are expected to be more commonly applied in the future.